Kavala Blogs » The light of the LAMP » Τα επιλεγμένα μπλογκ του νομού Καβάλας με μια ματιά

Expand/Collapse

The light of the LAMP (28)

Καβάλα, 25.03.2012
"Bad request Error 400" for GMail on Firefox

Posted: March 24, 2012, 3:28am EDT by Apostolos Tsompanopoulos

For the last 2-3 days I had an unusual situation to deal with. Whenever I tried to visit my GMail account using Firefox, the response was:

Bad request
Error 400
At first I checked with the other browsers (Chrome, Opera and Midori) I have installed on my system. All connected without reporting anything.
Then, my next guess was misbehaving addons, but as I tweeted:

So, what is wrong with #GMail on #Firefox today? "Bad request Error 400" (even with all addons disabled)
— A. P. Tsompanopoulos (@aptlogs) March 22, 2012
Since that approach didn't helped either, I decided to remove the GMail-related cookies. I used the "Remove cookie(s) for Site" addon and it deleted 78 cookies I had for GMail.

Unfortunately, I don't know which cookie was the "bad" one, but after deleting them I was again able to reconnect without problem.
Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 12.03.2012
No editor toolbar on Wordpress

Posted: March 12, 2012, 9:13pm EDT by Apostolos Tsompanopoulos

Just a quick note for me and anyone else with a similar problem:

If the rich-text editor on a Wordpress blog is not displayed correctly (i.e. no visible toolbar or no access to writing area -- I recently had both symptoms) then the problem might be an incompatible library used in a plugin.

For my case, the solution of the problem was to deactivate the "Spelling & grammar" box of the JetPack plugin by selecting "Learn more" at first and then "De-activate". Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 29.11.2011
Think like a virus!

Posted: November 29, 2011, 8:51am EST by Apostolos P. Tsompanopoulos

Not related to L.A.M.P. technologies, but a useful quote to remember if you are a net admin:

As a network administrator, you have to think like a virus.
How can I get into a network?
Which points are the most vulnerable?
Once in, what's the easiest path to destruction?
From the "Windows sources" magazine, July 1997 issue, page 158, "NT admin> Stop network attacks" by David Chernicoff Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 01.11.2011
How to hide "Mark all as read" in new Google Reader

Posted: November 1, 2011, 10:21am EDT by Apostolos Tsompanopoulos

With the new redesign of Google Reader (the Google+ look-alike), I've noticed a new annoying behavior today.
The "Mark all as read" in now a button that takes and keeps focus. This means that if you press it once with your mouse and, then, go to another group of posts and press space to view the next page, you 'll end to mark all posts in that group as read!!! [because the "Mark all as read" button has got the focus]
The easier work-around solution I've found is to hide that button and use Ctrl-A Shift-A [edited] whenever I want to use the [main] functionality. I know that by hiding all options I miss the option to mark all older than a date as read, but I can live with this instead of marking as read all posts by mistake.

Since I work with Firefox and use Stylish, this hiding is easy. Just add a new recipe, name it something like "hide mark all in GReader" and insert the following in it:

@-moz-document url-prefix [www.google.com] url-prefix [https:] url-prefix [google.com] url-prefix [https:] { span#mark-all-as-read-split-button { display: none !important; } }
and enable the Stylish recipe when you want to feel safe. Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 22.09.2011
How to hide the new Facebook news feed

Posted: September 21, 2011, 12:48am EDT by Monotropos
In case you are using Firefox and you want to hide the new Facebook right-column news feed, here is a quick hack.
- At first, you need to install Stylish, if you don't have it already.
- Add a new blank style with the following lines in it and give it whatever name you want.
- Energize! ;-)
The code:

@namespace url [www.w3.org] @-moz-document domain("facebook.com") { .fbFeedTickerStory { display: none !important; } }
Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 18.09.2011
How to forward a Google+ post to your email inbox

Posted: September 18, 2011, 1:08pm EDT by Monotropos
While we 're still waiting for the full Google+ API to be available in public, I recently asked in twitter for "an easy way to save GooglePlus posts for later reading or archiving" and this is the solution I found since then:
- Go to Google+ and create a new circle.
- Add in this circle one of your email addresses, that has NOT a Google+ account; just the email. In case you don't have a second email address, either create one or use the plus-enhanced mode of the one you already have (if your provider accepts this mode), i.e. something like username+gplus@email.provider.tld (given that your email is username@email.provider.tld, you should add "+gplus" (or something similar) just before the "@" sign -- replace "username", "email.provider.tld" as appropriate).
- From now on, when you find something interesting, you have to share it with this new circle and, since the one member of the circle has no Google+ profile, the interesting post will land into your email box.
Update [2011/09/21]: this technique comes handy also when you want a copy of your posts into your email box. You just have to include the "me" circle as a recipient of your posts, along with the other circles or people.

With this trick you don't need an RSS feed for your posts [although I think that Google must implement this as a feature, IMHO]
Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 31.07.2011
Re-enabling Google FriendConnect gadgets

Posted: July 31, 2011, 7:09pm EDT by Apostolos P. Tsompanopoulos

In case you see blank boxes in your Firefox, instead of Google FriendConnect (GFC) gadgets, you can try searching the configuration window of the HTTPS Everywhere add-on. For me, it was the GoogleServices option, which I had to deactivate in order to re-enable the GFC gadgets.

[HTTPS] Everywhere Preferences window

It took me some time and several deactivations and reactivations of my add-ons while trying to find the culprit and I found it. Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 27.07.2011
Show all my active WordPress plugins

Posted: July 27, 2011, 8:26pm EDT by Apostolos P. Tsompanopoulos

Recently, I needed to get a list of every plugin that I've activated on all of my WordPress local-hosted blogs.
So, instead of going to every blog's dashboard and noting down the list of every active plugin, I decided to write a quick (and dirty, i.e. not optimized) script.

<?php // initialize variables [you have to change them to their proper values] $dbhost = "localhost"; $dbuser = "dbuser"; $dbpass = "dbpassword"; // connect to MySQL and get all database names $db = mysql_connect( $dbhost, $dbuser, $dbpass) or die( "MySQL connection problem: " . mysql_error()); mysql_set_charset( "utf8"); mysql_select_db( "information_schema", $db) or die( mysql_error()); $sql = "SELECT SCHEMA_NAME FROM SCHEMATA"; $u0 = mysql_query( $sql, $db) or die( mysql_error()); $alldb = array(); while ($u1 = mysql_fetch_row( $u0)) { $alldb[] = $u1[ 0]; } // select each database found and check for active plugins foreach( $alldb as $adb) { $conn = mysql_select_db( $adb, $db); // get *_options table name $sql = "SHOW TABLES FROM $adb LIKE '%_options'"; $u0 = mysql_query( $sql, $db); // or continue; while ($u1 = mysql_fetch_row( $u0)) { if ($opt = $u1[0]) { // get active plugins list $sql = "SELECT * FROM $opt WHERE option_name='active_plugins'"; $u00 = mysql_query( $sql, $db); if ($u01 = mysql_fetch_array( $u00)) { $apj = $u01[ 'option_value']; if ($apj) { $ap = unserialize( $apj); foreach( $ap as $apv) echo "Database: $adb >>> $apv\n"; } } } } } mysql_close( $db); ?>
The output of this script is a list of all active plugins, one for each line, so it can be used in a shell script, for example one can find out how many of them are active:

php show_all_active_plugins.php | wc -l
or find out which blogs are using a certain plugin:

php show_all_active_plugins.php | grep akismet

Disclaimer: as usual, this script works for my setup and, for this reason, I'm sharing it here for everyone interested. I hope it will work for anyone else who tries it, but I cannot guarantee it for every possible situation. Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 12.07.2011
How to share an article from Google Reader to Google+

Posted: July 12, 2011, 11:42pm EDT by Monotropos
Just a quick tip for every Google Reader user who needs to share an interesting article with one or more of her Google+ Circles.

Given that we have the Google+ share box on the top-right corner of GReader, the simplest way I've found is:
1. grab the URL of the article, by right-clicking on its title and select "Copy link location"
2. click at the "Share" box (at the top-right corner of the window)
3. click at the chain icon ("Add link") and paste the copied URL there; press the "Add" button
4. select the people or circles you want to share it with
5. if you want, you can comment on the text-box above the link
6. click at the "Share" button
Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 05.07.2011
CRON error: grandchild failed with exit status 1 [Solution]

Posted: July 5, 2011, 3:49pm EDT by Apostolos P. Tsompanopoulos

Just after I upgraded my Ubuntu to 10.10 version, I noticed some cron-related error messages in my /var/log/syslog file, like these:

Jul 5 13:40:01 agriope2 CRON[971]: (CRON) error (grandchild #974 failed with exit status 1) Jul 5 13:50:01 agriope2 CRON[7775]: (CRON) error (grandchild #7778 failed with exit status 1) Jul 5 14:00:01 agriope2 CRON[14520]: (CRON) error (grandchild #14526 failed with exit status 1) Jul 5 14:00:01 agriope2 CRON[14521]: (CRON) error (grandchild #14531 failed with exit status 1)

At first, I thought they were generated by one of my scripts, which runs via cron every 10 minutes and I wondered what happened during upgrade that caused its exit status to turn to 1 instead of 0. Unfortunately, I didn't had the time to delve deeper back then and I ignored it, since everything seemed to work as expected.

Until today, when (after one more successful system upgrade in the meantime) I decided to examine it further.
Given that nothing has changed into my script, I thought that it would be a good idea to search into /etc/cron* directories and there I found that there was the script /etc/cron.d/update-motd, which was scheduled to run every 10 minutes and tried to run /usr/sbin/update-motd. The problem is that /usr/sbin/update-motd was not present any more at its whereabouts, probably because "the functionality formerly provided by update-motd package is now integrated into pam_motd, in libpam-modules" (as the description of update-motd package says).

So, I moved /etc/cron.d/update-motd to another location, just in case I will need it again some time in the future.

Update [2011/12/25]:
In case you are running fetchmail from cron, you 'll have messages like the above whenever you have no new mail. For this situation, the solution is already in the man page of fetchmail:

If you do not want "no mail" to be an error condition (for instance, for cron jobs), use a POSIX-compliant shell and add

|| [ $? -eq 1 ]
to the end of the fetchmail command line, note that this leaves 0 untouched, maps 1 to 0, and maps all other codes to 1. See also item #C8 in the FAQ.
Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 12.09.2010
Look is like a restricted grep

Posted: September 12, 2010, 12:12pm EDT by Monotropos

The look command is for looking up if a word exists in /usr/share/dict/words file, at least for most users. But, as the man page defines:

look — display lines beginning with a given string
which means that, for example, this command:

look what file
is equivalent to this command (with the exception that look ignores all whitespace characters at start):

grep '^what' file
With this in mind, we can search easily for comment lines in all javascript files:

look '//' *.js
or in .bashrc

look '#' ~/.bashrc
For more, there is always grep, of course. Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 28.06.2010
PHP: print a calendar fast

Posted: June 27, 2010, 1:23am EDT by Monotropos

Say you need to fill a file or a sheet of paper (if you print the output) with a range of consecutive dates (or dates with equal space between them). Then, the following PHP one-liner might be handy some day:

for ($i=1; $i<=365; $i++) echo date( "Y-m-d", mktime( 0, 0, 0, 1, $i)). "\n";

The above snippet prints each day of current year on its own line. If you want one day per week, then you can change accordingly the values of for-loop variable, for example:

for ($i=4; $i<=365; $i+=7) [...]
Or, for next year's calendar:

for ($i=1; $i<=365; $i++) echo date( "Y-m-d", mktime( 0, 0, 0, 1, $i, 1+date("Y"))). "\n";
Don't forget to change 365 with 366 for a leap year. Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 22.05.2010
Google secure search with Firefox

Posted: May 22, 2010, 3:19pm EDT by Monotropos
Google has announced recently the option to search the web via an encrypted, secure channel. For Firefox, this can be accomplished by making some changes, like the following:
- in a new tab, open "about:config" and search for "http://www.google" (search box is located at the top of the tab area). You 'll find "keyword.URL" setting and you can change its value by double-clicking on it. Just add "s" after "http".
- open bookmarks by pressing Ctrl+Shift+B and search for "google.com/search? q=" (search box is located at the upper right corner of the window). At first, you can eliminate all duplicates (as I did), then change all "http" occurrences to "https"
For Google Toolbar users, I believe there will be an update very soon. Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 21.05.2010
How many jquery.js files do YOU have in your disk?

Posted: May 21, 2010, 9:07am EDT by Monotropos

It seems that jquery is the most popular javascript framework among web developers out there. This is not a bad thing, of course. The bad thing, or should I've said "practice", is that almost all developers [need to] use their 'own' version of the library and they include it into their plugin/theme/application directories!

Don't get me wrong; I'm not (currently) using it to code anything, but yesterday I thought it could be a good start to find the library and check its contents in order to start learning & using it. To my surprise, when I checked into my hard disk, I found 50 jquery.js files (not to mention the 364 jquery.*\.js ones)! It looks like a waste of space and a source of possible incompatibilities to me, don't you think so?

Just try this command in a terminal:

locate -i jquery | grep "jquery.js" | wc -l
or the 'full' version:

locate -i jquery | egrep "jquery.*\.js" | wc -l
and see how many files it 'll report for your hard disk. If there are more than 10 (as in my case), I'd be worried.

I believe that all of that mess could be avoided if the developers used the Google-hosted versions of the library and avoided its inclusion into their directories.

On the other hand, if you are a developer and want to test your source files with a local version of the library, while providing the Google-API one to your visitors, you can use the is_me() [PHP function] to incorporate the appropriate jquery files. Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 17.05.2010
Google Wave as a chat web application

Posted: May 17, 2010, 10:22pm EDT by Monotropos
I admit that I'm not using Google Wave as much as I can and the main reason for this is the lack of coworkers/colleagues/friends who are actively using it. The tool must have a purpose, right?

So, yesterday, I've come with an idea to create a purpose for me and the members of one of my sites. Since Google allows me to make a wave public and embed it in a web page, I can't see no reason not to create a public wave and use it as a web application for chat!

The benefits for this decision are more than the disadvantages. Actually, I can see only two of the latter: the small number of people who are using it and the fact that it is still in beta version and one can become a member only by invitation by another member [19 May 2010 update: Google announced today that access to Google Wave is free to everyone, given that she has a Google account]. On the other hand, the usage of a public wave as a chat application has the following advantages (at least, for me):
- Easy setup: Just copy-paste the code from the Google Web Elements page and start using it. Also, there is no need for local storage or a dedicated database.
- Instant notifications: The members can see the replies of the other members, as they are writing them or even replay the discussion step by step. There are also email notifications for new replies, so (a) there is no need to continuously check the web page and (b) you can react immediately if you detect any abuse.
- Indented replies: The members can choose to reply to a discussion or start their own.
- Identified members: There are no anonymous replies (possible spam), albeit the public nature of the wave.
There may be more, we 're still evaluating this solution and maybe there is something I didn't reckon when I decided to follow this route. I know that there are other alternatives, but you can't beat the simpleness of this one. Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 31.01.2010
System upgrade to Ubuntu 9.10

Posted: January 31, 2010, 3:10pm EST by Apostolos P. Tsompanopoulos

I know that I'm some months late on upgrading, but for a production system I prefer to let things cool down a little before attempting the system upgrade. However, even with this methodology, there may be still some problems after finishing, and I have found two of them today, after upgrading to karmic koala version of Ubuntu (9.10 for number-centric fans).

The first one was a problem with mysql-client, which remained in 5.0 version for some reason. I was able to resolve this issue by manually installing version 5.1:

aptitude install mysql-client-5.1

The second problem had to do with updating vnstat's database ('vnstat -u'). After testing various ideas, I came up with no other solution than deleting the previous databases and recreating new ones with the following commands:

rm /var/lib/vnstat/eth* /var/lib/vnstat/.eth*
vnstat -u -i eth0
vnstat -u -i eth1

I hope that there will be no other surprises (until the next upgrade of course) Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 02.09.2009
send mail to correct local host

Posted: September 1, 2009, 3:24am EDT by Apostolos P. Tsompanopoulos

After upgrading my previous server with a new one, I run a lot of migration scripts and update procedures to make sure that everything transferred OK and worked as expected. However, a little thing kept bugging me until today.

Usually, when you want to send an email message to a local user, you either send it to user@localhost or just to user and the mail service makes sure that the local hostname is added after the '@' (if there is nothing there of course). But the problem for me was that messages to local users relayed through my external mailgate after the upgrade.

The /etc/hosts and the configuration files of postfix were already filled with the correct hostnames and I could not find anything until I tried to search all the files in /etc hierarchy for the old hostname.

To my surprise, I found that the old hostname was still in /etc/mailname which, according to its man page, is a plain ASCII configuration file, which on a Debian system contains the visible mail name of the system.

I don't know if the upgrade kept it intact or it was the restoration of /etc data files that caused this discrepancy. The good thing is that I found it easily by searching with grep. Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 31.08.2009
Change photo extensions by content

Posted: August 31, 2009, 2:26pm EDT by Apostolos P. Tsompanopoulos
Recently I had an interesting problem. I had a lot of files in a directory, all photos, with their filenames messed up, especially their extensions. So, in order to clear them and keep only the good ones, I had first to rename them in a more consistent manner (the JPEG photos ending with .jpeg, the PNGs with .png and so on).

I guess there is probably a plethora of appropriate tools, but I had no time to search in the chaotic internet, so I wrote a small PHP script (with a little help from the shell: command 'file') and run it from the command line.

The script just parses the output of the file command and renames each file accordingly.

I'm putting this here, just in case it will be useful to someone else also:
```
#!/usr/bin/php
<?php

$res = array();
exec( "file *", $res);

foreach( $res as $f) {
 list( $fn, $ft) = split( ':', $f);
 if (strpos( $ft, "JPEG") !== false) {
  rename( $fn, $fn .".jpeg");
 } else if (strpos( $ft, "PNG") !== false) {
  rename( $fn, $fn .".png");
 } else
  echo "cannot rename $fn\n";
}
?>
```
I'm actually testing only for JPEG & PNG files since I know that I have only these two types.
Don't forget to make this file executable if you want to run it from the command line. Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 20.05.2009
Focus-stealing applications

Posted: May 20, 2009, 11:03pm EDT by Monotropos

I don't like focus-stealing applications (and I bet that I'm not the only one)! They are like kids who are struggling for your attention while you 're working with something else, constantly interrupting your thoughts and work flow.

Is it so difficult for the developers to take this thing into consideration?
Come on people, don't you get annoyed when you are developing _and_ testing these applications?

An example:
I started using FriendFeed's desktop application, which notifies me when something occurs in my friends streams. It's a well designed application, taking very little area in my desktop, except when there are new bubble-notifications. Then, whatever I'm doing I have to stop, because little bubbles start popping up while, at the same time, becoming the top-level window (thus stealing my keystrokes)! Usually, if I'm in the middle of something important I end up unloading this little ghost!

I strongly believe that tray-located applications must be as transparent as they can be. They are there to work silently and (probably) notify the user, but without interrupting the work she's doing, otherwise they are not useful but distracting. Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 29.03.2009
3D: Desktop Describing Day

Posted: March 28, 2009, 2:11am EDT by Apostolos P. Tsompanopoulos

Our desktops are (like) our offices, right?
Well, not for me friends!

Although my 3D (i.e. real life) office is rather messy (at least for other people, not for me of course), my computer desktop is rather simple.

I work usually with my laptop, as most people do these days, and, since I'm rather a CLI person, I like it 'naked'. I'm using XFCE as my window manager with 2 virtual desktops (featuring a dark, mostly black, photo from my favorite tv-show as a background picture and only 4 icons which I rarely open) and its tray sitting on the lower right corner with a bottom-up direction.

This tray contains (bottom -> up): battery readings, time/date, gwibber, RSIBreak, the sound applet and the open applications bar.

I have only two windows open all the time: xfce4-terminal (with at least 3 open tabs) and Firefox (with 2+ open tabs). Of course, when needed, I may open OpenOffice.org or some other windows, but usually I work with just these two.

Don't worry about underusing my laptop; it's actually a full LAMP server, working 24/7 and serving 4 web sites (for now).

You may find this arrangement rather minimalistic, but I find it very work-oriented and I prefer it from a more complicated one.

So, what is your desktop like? Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 03.01.2009
I don't like you any more, ScribeFire!

Posted: January 3, 2009, 11:29am EST by Monotropos

Today I uninstalled the ScribeFire addon for Firefox because I was not happy by its performance.

Don't get me wrong... I 've used it as an offline blog post editor for more than a year and, I have to say that, it has some very useful features and I recommend it to anyone, who needs this functionality, to try it since it's in constant development with new versions appearing almost any month.

But, since it was not as WYSIWYG as I thought (at least when cooperating with Blogger), I decided to not use it anymore. Maybe it's Blogger, maybe it's ScribeFire, I can't say for sure... the fact is that my latest post (on another blog) didn't appeared the same way when I published it to Blogger, so I had to open it again with Blogger's editor to correct it.

I 'd like to use such an offline editor, so I can post from the convenience of my browser, keep my notes and references for later use, be able to post to and interact with more than one blogs. In the past, I 've used many alternative solutions and I thought my search was over with ScribeFire. But, if I have to check that everything is OK every time (and most times to edit again the posts), then I'm not content. Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 23.10.2008
Sample data and how to produce them

Posted: October 23, 2008, 9:43am EDT by Apostolos P. Tsompanopoulos

Sometimes a programmer needs to test/debug one application by feeding it with data, random or not. In a situation like this, there are some utilities one can use to produce as many data as she needs.

Let's start with a simple example of feeding our test application (we will call it "test_data") with zeroes, say 100 bytes with a value of zero.

head --bytes=100 /dev/zero | ./test_data

The above command has two parts; the first one (before the '|' delimiter), 'head', reads /dev/zero device, which provides us with zero-valued bytes as a stream, up to a count of 100 bytes and sends them to the second one, 'test_data', as input. If we wanted more, say 100 KBytes, we would replace the parameter of 'bytes' argument with "100k", as follows:

head --bytes=100k /dev/zero | ./test_data

Now, let's say we want random data. It's as simple as replacing '/dev/zero' device with '/dev/random':

head --bytes=100k /dev/random | ./test_data

With the above command combination, we produce 100 KBytes of random data as input to our test_data application.

And what if we wanted some specific data, like "testing with sample data", repeated 40 times?

yes "testing with sample data" | head -40 | ./test_data

The 'yes' command just outputs its input continuously; 'head' keeps only the first 40 lines; 'test_data' works with these 40 lines of the sample string.

Programming life can be very simple (and entertaining) some times! Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 07.10.2008
Use the source, Luke... even for HTML pages!

Posted: October 6, 2008, 12:17am EDT by Monotropos

These days I'm experimenting with a few desktop clients to read/update status messages from/to some socail networks I participate and I want to be involved more from now on. But there is a small catch!

Most desktop clients nowadays are being built using Adobe's AIR. So, at first, I downloaded and installed the AIR package for Linux and all went well.

After that, I had to visit each client's homepage to install the client. In order to make things easier for the end user to complete the installation, there is an automated procedure through the webpage. The only problem is that this procedure fails to accept the fact that I have already installed AIR and doesn't let me proceed with the download/installation.

So, what can a poor developer/user do in such a situation?
Simple... "use the source, Luke!" and look at the HTML code of the webpage and try to find the link reference to the ".air" file, then download it manually and continue the installation from the command line using AIR's "Adobe AIR Application Installer" (located at /usr/bin directory).

From Firefox, while viewing the desktop client's webpage, press Ctrl+U to view the source, search for ".air" (without the quotes) and copy to clipboard the URL in the 'a href=' clause. Paste the copied URL into the location bar and save the file to your hard disk. Then run

Adobe AIR Application Installer
and guide it to the just-downloaded file to start the installation.

As usual, "the devil is in the details", right? :-) Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 18.06.2008
Firefox 3 download day

Posted: June 18, 2008, 12:22pm EDT by Apostolos P. Tsompanopoulos

Today is the day Firefox 3 has launched and the day it tries to break a world record of the most downloads and installations of a software package in a day.

So, if you like Firefox, why don't you help?

Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 13.06.2008
Backup files before editing

Posted: June 13, 2008, 9:02am EDT by Apostolos P. Tsompanopoulos

It's a fact that many text editors (or word processors) have the ability to keep a backup copy of every file you edit, just to assure you that you can always restore the previous version of the file. This is usually implemented by creating a copy of the file with a file extension of .bak or by appending a "~" character at the end of the current file extension, like .c~

Although being a useful option for a programmer (or a writer), it lacks the capability of keeping more backup copies, like a CVS (Concurrent Versions System) where the author can go back in time and find the text file as is was e.g. a month ago (very handy if you want to restore something you have deleted just before one week).

In order to avoid the complexity of a CVS, yet having the option to "travel" back in time, I wrote a small shell script, which I'm running just before my editing sessions. The script looks like this:

#!/bin/bash
datetime=`date +%Y%m%d_%H%M`
bdir=".backup"

mkdir $bdir 2> /dev/null

for a in $*; do
cp -av $a $bdir/$datetime.$a
done
gzip -9 $bdir/$datetime.*

All it does is to keep a compressed copy of every file you want to edit in a directory named ".backup", hence I named it "backup2.backup" and I run it as:

backup2.backup *.php *.html

It doesn't check many things, but I'm using it for some time now. Feel free to enhance it as you like it.

Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 23.04.2008
Formatting human readable numbers with PHP

Posted: April 23, 2008, 4:57pm EDT by Apostolos P. Tsompanopoulos

One of my former colleagues, Athanassios Bakalidis, in his latest blog post "Java: Formatting a Number Using a Custom Format", has written about number formatting in Java language. This post made me think about the ways we 're using to print numbers from PHP to HTML output.

When we 're dealing with integers, usually it's sufficient to add a

style="text-align: right;"
to right-align the numbers in a column.

Floating point numbers, on the other hand, may require the use of number_format() function to properly format them, for example to have the same number of decimals (added to the obvious round(), floor() and ceil() functions).

But, what if I wanted to sort an array having two arithmetic columns?
Then, I'd use the sprintf() function to zero-pad numeric values, like this (certain sections are omitted):

$u0 = mysql_query( $sql, $db) or die( mysql_error()); $aa = array(); while ($u1 = mysql_fetch_row( $u0)) { $id = $u1[0]; $c1 = $u1[1]; $aa[$id] = number_format($u1[2]/$c1,4) .":". sprintf("%06d", $c1); } arsort( $aa); reset( $aa); while (list($k, $v) = each($aa)) { list( $v1, $c1) = explode( ":", $v); $c1 = intval( $c1); $v1 = round( $v1, 2); [......] }

With this technique, one can sort numeric values properly as numbers (although by internally converting them to strings). Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 22.03.2008
Twit from PHP with cURL

Posted: March 22, 2008, 12:15pm EDT by Apostolos P. Tsompanopoulos
There are cases you need to update a special Twitter feed to inform your visitors about something that has happened to your site. Then, this PHP function might be very useful if you add it in your functions arsenal:
```
/* inform twitter about something */
function twit( $msg = "")
{
 $username = "twitter-username";
 $password = "twitter-password";
 $ch = curl_init();
 curl_setopt( $ch, CURLOPT_URL, "http://twitter.com/statuses/update.xml");
 curl_setopt( $ch, CURLOPT_RETURNTRANSFER, TRUE); // change to FALSE for not reporting XML output
 curl_setopt( $ch, CURLOPT_POST, 1);
 curl_setopt( $ch, CURLOPT_POSTFIELDS, "status=" . urlencode( $msg));
 curl_setopt( $ch, CURLOPT_USERPWD, "$username:$password");
 ob_start();
 $response = curl_exec( $ch);
 ob_end_clean();
 curl_close( $ch);
 return $response;
}
```
As you can see, it only takes a string argument; the message you want to send. It returns also a string, which is either a true/false value or an XML-formatted response, depending on the value of CURLOPT_RETURNTRANSFER.
In order to use this function, you need to have installed the cURL extension of PHP. You can check if it's installed quickly with the following command:
```
$ php -i | grep -i curl
```
If cURL is installed, you can expect an output like this:
```
additional .ini files parsed => /etc/php5/cli/conf.d/curl.ini,
curl
cURL support => enabled
cURL Information => libcurl/7.16.4 OpenSSL/0.9.8e zlib/1.2.3.3 libidn/1.0
```
If not, the package you need to install is php5-curl.
Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »
Καβάλα, 09.03.2008
Some KDE tips

Posted: March 9, 2008, 12:18pm EDT by Apostolos P. Tsompanopoulos
It's a beautiful Sunday morning and, in case you 're working with KDE Desktop Environment, here are some tips on using it more productively. Some of them are very old, but still useful.
- Let's say you 're programming or writing a script and you don't remember the syntax of a command. Bring up the command line (press Alt-F2), enter a hash (#) mark followed by the command name. The man page, in hyperlinked text, will open in Konqueror.
- You can maximize windows in three different ways:
  - Click on maximize with the left mouse button to open to full screen.
  - Click on maximize with the middle mouse button to maximize only vertically.
  - For horizontal only, use the right mouse button.
- Clicking on the title of a window with middle mouse button, pushes it behind the other windows, while it retains its focus. For example, when you 're editing a file, you can check the contents of another window while, in parallel, you can continue editing.
- You can change the desktop wallpaper by dragging an image from a Konqueror window to the desktop and selecting "Set As Wallpaper".
Visit The Light of the LAMP blog for more...

Διαβάστε όλο το άρθρο στο "The light of the LAMP" »

|

Μεταφράστε αυτό το άρθρο (Translate this article) »

← ThassosPress Wos activethinking →

Last Update: 25.05.2012 08:00:44	To KavalaBlogs.gr είναι συναθροιστής των τοπικών blogs. Όλα τα κείμενα που αναδημοσιεύονται εδώ ανήκουν στους συγγραφείς και δεν εκφράζουν απαραίτητα τους διαχειριστές του KavalaBlogs.gr. Αν κάποιο άρθρο σας θίγει με οποιονδήποτε τρόπο, παρακαλώ ειδοποιήστε μας ώστε να το αφαιρέσουμε αμέσως.
	Πληροφορίες Πληροφορίες για το site Καταχωρήστε το blog σας Συχνές ερωτήσεις (FAQ) Διαφημιστείτε εδώ!	Επισκεφθείτε επίσης Pass Free Internet Hotel Philoxenia Κeramoti Data Recovery 24 Βάλτε το link σας εδώ!

Kavala Blogs » The light of the LAMP

Feeds

The light of the LAMP (28)

Posted: March 24, 2012, 3:28am EDT by Apostolos Tsompanopoulos

Posted: March 12, 2012, 9:13pm EDT by Apostolos Tsompanopoulos

Posted: November 29, 2011, 8:51am EST by Apostolos P. Tsompanopoulos

Posted: November 1, 2011, 10:21am EDT by Apostolos Tsompanopoulos

Posted: September 21, 2011, 12:48am EDT by Monotropos

Posted: September 18, 2011, 1:08pm EDT by Monotropos

Posted: July 31, 2011, 7:09pm EDT by Apostolos P. Tsompanopoulos

Posted: July 27, 2011, 8:26pm EDT by Apostolos P. Tsompanopoulos

Posted: July 12, 2011, 11:42pm EDT by Monotropos

Posted: July 5, 2011, 3:49pm EDT by Apostolos P. Tsompanopoulos

Posted: September 12, 2010, 12:12pm EDT by Monotropos

Posted: June 27, 2010, 1:23am EDT by Monotropos

Posted: May 22, 2010, 3:19pm EDT by Monotropos

Posted: May 21, 2010, 9:07am EDT by Monotropos

Posted: May 17, 2010, 10:22pm EDT by Monotropos

Posted: January 31, 2010, 3:10pm EST by Apostolos P. Tsompanopoulos

Posted: September 1, 2009, 3:24am EDT by Apostolos P. Tsompanopoulos

Posted: August 31, 2009, 2:26pm EDT by Apostolos P. Tsompanopoulos

Posted: May 20, 2009, 11:03pm EDT by Monotropos

Posted: March 28, 2009, 2:11am EDT by Apostolos P. Tsompanopoulos

Posted: January 3, 2009, 11:29am EST by Monotropos

Posted: October 23, 2008, 9:43am EDT by Apostolos P. Tsompanopoulos

Posted: October 6, 2008, 12:17am EDT by Monotropos

Posted: June 18, 2008, 12:22pm EDT by Apostolos P. Tsompanopoulos

Posted: June 13, 2008, 9:02am EDT by Apostolos P. Tsompanopoulos

Posted: April 23, 2008, 4:57pm EDT by Apostolos P. Tsompanopoulos

Posted: March 22, 2008, 12:15pm EDT by Apostolos P. Tsompanopoulos

Posted: March 9, 2008, 12:18pm EDT by Apostolos P. Tsompanopoulos